KESTAR INFORMATION SHEET
Turco W.O.2 Oxide/Rust Remover - Surface Treatment
DESCRIPTION
W.O.2 is a scientifically blended solution formulated to remove rust, oxides and mill scale from ferrous and non-ferrous surfaces. The product is a mild phosphatising agent and provides an ideal base for paint on aluminium or steel surfaces. An inhibitor is included in the product to prevent serious attack on the base metal, while removing rust and scale.

USAGE
Do not use on zinc or magnesium alloys.
The surface must be clean of grease, oil and paint before treating.
W.O.2 may be applied by brushing, spraying or immersing.

CAUTION
Protect sensitive skin, eyes and clothes as it is acidic based. (phosphoric acid)
Use adequate ventilation (equivalent to outdoor).
Avoid prolonged breathing of fumes.

TYPICAL DILUTION VALUES

TYPE OF RUST/SCALE
W.O.2
WATER
Thick scaly rust
1
1
Light scaly rust
1
2
Hard mill scale
1
2
Loose mill scale
1
3
Light mill scale
1
3
Heavy loose rust
1
3
Light loose rust
1
3
Metal showing tendency to rust
1
5
No rust or mill scale
1
10
Rinse if sticky after W.O.2 application
1
10

 Cost:-  AUD$25.00 /litre concentrate

Why pay $11 for 150mL of ready-to-use solution
when you can make from between 3 -  11 litres 
depending on strength required?

Available only in the Adelaide metropolitan area of South Australia
as corrosive materials cannot be sent through the mail.

Please email via the website or phone Kestar 0403 225 871 (Optus) (in Australia)  for details.
NOTE:- DELTANITE USERS
Deltanite used to be available in Australia, but now a source cannot be found. 
W.O.2 has been found to be just as effective as Deltanite.
Go To Top